Order Products : sales@su-jiao.com
FLEXITEQ™ 58A010UV
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Marplex Australia Pty. Ltd. |
| Trademark: | FLEXITEQ™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nTm5uZ_FLEXITEQ-58A010UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FLEXITEQ™ F58A010UV is a formulation based on Santoprene™ rubber technology. It is formulated for extrusion including thin wall or complex profile applications in a pre-coloured material. FLEXITEQ™ F58A010UV is an improved UV resistant version and can be processed on conventional thermoplastic equipment for extrusion. It is polyolefin based and completely recyclable. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.968 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 63 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 4.20 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 260 | % | ASTM D412 |
| Tear Strength 3(23°C) | 20.0 | kN/m | ASTM D624 |
| Compression Set 4 | ASTM D395B | ||
| 23°C, 70 hr | 24 | % | ASTM D395B |
| 70°C, 22 hr | 32 | % | ASTM D395B |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Cylinder Zone 1 Temp. | 160 - 185 | °C | |
| Cylinder Zone 3 Temp. | 175 - 200 | °C | |
| Cylinder Zone 5 Temp. | 185 - 205 | °C | |
| Melt Temperature | 185 - 205 | °C | |
| Die Temperature | 185 - 205 | °C | |
| Back Pressure | 5.00 - 20.0 | MPa |
| Extrusion instructions |
|---|
| Typical Mesh Screen Combination: 20/40/60 |
| Note Message | |
|---|---|
| 1 . | C mold, 500 mm/min |
| 2 . | Mouth die C, 500 mm/min |
| 3 . | C mold, 500 mm/min |
| 4 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adell Polyamide AF-10-667B | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| DURACON® M90-45 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer | DURACON® |
| Kumho SBR 1502 | Korea Kumho Petrochemical Co., Ltd. | SBR, Emulsion | Kumho SBR |
| IROGRAN® A 70 H 4673 M | Huntsman Corporation | TPU-Polyester | IROGRAN® |
| Durethan® BKV 35 XTS1 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
