Order Products : sales@su-jiao.com
FINGERPRINT™ DFDC-7525 NT
| Category: | MDPE , Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | FINGERPRINT™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nRq78W_FINGERPRINT-DFDC-7525-NT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FINGERPRINT™DFDC-7525 NT is a medium density polyethylene resin, and its preparation process uses Unipol™Processing technology. The resin is applied to thin-wall micro-irrigation tape and profile extrusion processing. DFDC-7525 NT has good drafting characteristics, which makes the processed strip achieve a reliable balance between convenient extrusion and toughness. this product can also be used as a blending component for the modification of high pressure, very low density, linear low density or high density polyethylene resin to improve its physical properties. Outdoor applications need to add UV stabilizers to maintain excellent performance under long-term UV exposure. Adding 6.5% Dow DFNF-0092 carbon black color masterbatch can make the product have certain UV resistance. Main features:
slip agent content: none opening agent content: none industry standard
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.939 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | > 0.15 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 20 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(F0) | > 2000 | hr | ASTM D1693A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness 2(Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 3 | ASTM D638 | ||
| Yield | 26.2 | MPa | ASTM D638 |
| Fracture | 30.0 | MPa | ASTM D638 |
| Tensile Elongation 4(Break) | > 800 | % | ASTM D638 |
| Flexural Modulus 5 | 689 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature 6 | < -100 | °C | ASTM D746A |
| Vicat Softening Temperature | 116 | °C | ASTM D1525 |
| Melting Temperature (DSC) | 125 | °C | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 221 - 249 | °C |
| Extrusion instructions |
|---|
| 吹塑薄膜的制造条件： 螺杆类型：所有标准的商用挤出设备。 熔体温度范围：430 - 480 °F (220 - 250 °C) |
| Note Message | |
|---|---|
| 1 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 2 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 3 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 4 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 5 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 6 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Network Polymers PC 1011 L | Network Polymers, Inc. | PC | Network Polymers PC |
| AVP™ ZLL19CU | SABIC Innovative Plastics | PC | AVP™ |
| HiPrene® ALC12B | GS Caltex | Nylon 6 | HiPrene® |
| KRATON® D1102 K | Kraton Polymers LLC | SBS | KRATON® |
| Domamid HT™ 7750R50H3 | Technical Polymers, LLC | Nylon 66 | Domamid HT™ |
