Order Products : sales@su-jiao.com
Ultramid® B3EG2
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | BASF Corporation |
| Trademark: | Ultramid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nRgLnK_Ultramid-B3EG2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glass fibre reinforced injection moulding grade for housings with enhanced impact resistance (eg automotive mirror housings). Also used for the wheels of mountain bikes. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 0.70 | g/cm³ | |
| Melt Volume-Flow Rate (MVR) (275°C/5.0 kg) | 75.0 | cm³/10min | ISO 1133 |
| Viscosity Number (96% H2SO4 (Sulphuric Acid)) | 155 | cm³/g | ISO 307 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4500 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 110 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 5.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 35 | kJ/m² | ISO 179/1eU |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Polymer Abbreviation | PA6-GF10 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Marlex® HHM TR-457 | Chevron Phillips Chemical Company LLC | HDPE | Marlex® |
| Tecomid® NB40 GR30 NL XA60 | Eurotec Engineering Plastics | Nylon 6 | Tecomid® |
| TUFNYL® SXXIC GREY | SRF Ltd. | Nylon 6 | TUFNYL® |
| UNISOFT TPE™ ST-87A-NT-3-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT TPE™ |
| Lasulf LASULF G/15 | LATI S.p.A. | PSU | Lasulf |
