Order Products : sales@su-jiao.com
Lustran® ABS 241
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | INEOS ABS (USA) |
| Trademark: | Lustran® ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nRcoX3_Lustran-ABS-241.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Blending Grade for DWV Pipe and Fittings Lustran ABS 241 resin is a natural, stiffer-flow, virgin blending grade of ABS (acrylonitrile butadiene styrene). It is designed for use with other high-impact ABS resins for drain, waste, and vent (DWV) pipe and fittings. Lustran ABS 241 resin in natural color (000000) meets or exceeds ASTM D 3965 1-1-2-2-2 cell class requirements. It is also listed under NSF Standard 14. As with any product, use of Lustran ABS 241 resin in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Specific Volume | 0.950 | cm³/g | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (290°C/10.0 kg) | 15 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2480 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 41.4 | MPa | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, 3.18 mm | 80 | J/m | ASTM D256 |
| 23°C, 3.18 mm | 140 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed, 6.35 mm) | 102 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 - 93.3 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | < 0.050 | % | |
| Suggested Max Regrind | 40 | % | |
| Processing (Melt) Temp | 232 - 243 | °C | |
| Mold Temperature | 43.3 - 65.6 | °C | |
| Injection Rate | Moderate-Fast |
| Injection instructions |
|---|
| Injection Pressure: Moderately High to HighCushion: Minimum |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 - 93.3 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | < 0.050 | % | |
| Melt Temperature | 232 - 243 | °C |
| Extrusion instructions |
|---|
| Compression Ratio: 2.4:1 to 2.8:1L/D Ratio: 24:1 to 36:1Max Regrind Allowed: 40% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUMILITE® CEL-4560 | Sumitomo Bakelite Co., Ltd. | LLDPE | SUMILITE® |
| TRIREX® 3022L1(S2) | Samyang Corporation | PC | TRIREX® |
| apirex® MBL 35 UV | API SpA | TPU-Polyether | apirex® |
| EPS Silver® SR400R | INEOS Styrenics International SA | PS (EPS) | EPS Silver® |
| Integra™ PC GR10 NHFR0 HSV BK2000 | PolySource, LLC | PC | Integra™ |
