Order Products : sales@su-jiao.com

TEKNILID WPSPPE

Category:	Film, Coated Al Foil , Coated Al Foil Film
Manufacturer:	Tekni-Films, a div of Tekni-Plex
Trademark:	TEKNILID
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	nOZVV0_TEKNILID-WPSPPE.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

This data sheet describes TEKNILID WPSPPE product

This lid stock is made with a Polyolefin (PO) heat seal (HS) material for Food, Pharmaceutical, and Cosmetic applications requiring a peelable bond to PE, COC, and PP along with high oxygen and moisture barrier performance

You peel the foil back to expose the product

This material has excellent puncture and chemical resistance

It is available with custom and standard printing. A bright white exterior provided by Polyesterl white Polyethylene (W PE) outer layers makes an excellent printing surface for water based inks

General Information
Features	Excellent Printability Food Contact Acceptable Good Chemical Resistance Moisture Barrier Oxygen Barrier Puncture Resistant
Uses	Cosmetics Lids Non-specific Food Applications Pharmaceuticals
Agency Ratings	FDA Unspecified Rating USP Unspecified Rating
Forms	Film

Films	Nominal Value	Unit
Film Thickness ¹	130	µm
Yield	5.59	m²/kg
Seal Strength
-- ²	0.44	N/mm
-- ³	0.63	N/mm
-- ⁴	0.63	N/mm
Oxygen Transmission Rate (23°C, 100% RH)	0.0	cm³/m²/24 hr
Water Vapor Transmission Rate (38°C, 90% RH)	0.0	g/m²/24 hr

Note Message
1 .	Thickness tolerance: ±10%
2 .	To COC @ 350°F, 40psi, 0.5 sec
3 .	To PP @ 350°F, 40psi, 0.5 sec
4 .	To PE @ 350°F, 40psi, 0.5 sec

Resin Grade	Manufacturer	Category	Trademark
DENILEN A 2560 C EP	Vamp Tech	PP, Unspecified	DENILEN
FORMULA P FIB 3620/L	Putsch Kunststoffe GmbH	PP, Unspecified	FORMULA P
INLUBE PEIGF30TF15	Infinity LTL Engineered Compounds	PEI	INLUBE
Paracril® FP3380XC	INSA	NBR	Paracril®
Sylvin 86030-82 Clear	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin