Order Products : sales@su-jiao.com

NuSil CV-2187

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	nLsxaq_NuSil-CV-2187.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Tough, Flowable, Fast Cure

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: Tough, Flowable, Fast Cure

General Information
Features	Fast Cure Good Flow Good Toughness Low to No Outgassing
Uses	Adhesives Aerospace Applications Electrical/Electronic Applications Sealants
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 10
Part B	Mix Ratio by Weight: 1.0
Tack Free Time	15.0	hr

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	Translucent
Density	1.10	g/cm³
Viscosity	90	Pa·s
Curing Time (150°C)	0.25	hr
Pot Life	180	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	35
Tensile Strength	6.38	MPa
Tensile Elongation at Break	400	%
Tear Strength	13.1	kN/m

Resin Grade	Manufacturer	Category	Trademark
ADEKA EPR-4030	Adeka Corporation	Epoxy	ADEKA
Ecomass® 4703ZD90	Ecomass Technologies	TPU, Unspecified	Ecomass®
Hanwha Total PP TB32R	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, High Crystal	Hanwha Total PP
Kepamid® 2440GM7	Korea Engineering Plastics Co., Ltd	Nylon 66	Kepamid®
Alpha PVC 2232A/R-65S CLEAR 0217	Mexichem Specialty Compounds Inc.	PVC, Flexible	Alpha PVC