Order Products : sales@su-jiao.com
Geon™ Vinyl Dry Blend E3363
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Dry Blend |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nL6KP3_Geon-Vinyl-Dry-Blend-E3363.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon E3363 is suitable for darker colors above a 60 L value. Not recommended for horizontal applications such as railing and decking except in white. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 1-22443-43-0000 | ASTM D4216 | |
| PVC Cell Classification | 13344 | ASTM D1784 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2630 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 47.9 | MPa | ASTM D638 |
| Flexural Modulus | 2950 | MPa | ASTM D790 |
| Flexural Strength | 87.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact - Across Flow (23°C, 3.18 mm, Compression Molded) | 95 | J/m | ASTM D256A |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C | 88.5 | J/cm | ASTM D4226 |
| 23°C 3 | 122 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, annealed, 3.18mm 4 | 78.3 | °C | ASTM D648 |
| 0.45 MPa, annealed, 3.18mm 5 | 76.4 | °C | ASTM D648 |
| 1.8 MPa, annealed, 3.18mm, molded 6 | 80.2 | °C | ASTM D648 |
| 1.8 MPa, annealed, 3.18mm, molded 7 | 77.0 | °C | ASTM D648 |
| CLTE - Flow | 6.4E-5 | cm/cm/°C | ASTM D696 |
| Additional Information |
|---|
| Physical properties based on Geon E3363 gray 2581 production sample. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 193 - 204 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Procedure B, C.125 Throwing |
| 4 . | Annealed at 60 deg.C |
| 5 . | Annealed at 50 deg.C |
| 6 . | Annealed at 60. deg.C |
| 7 . | Annealed at 50 deg.C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| T-Blend® 0892N-NE | TSRC Corporation | SEBS | T-Blend® |
| Mylar® D1 (1000 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| Geon™ Vinyl Flexible G92C | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| LTP PC7150 | Chengdu Letian Plastics Co., Ltd | TP, Unspecified | LTP |
| LEXAN™ FL930 resin | SABIC Innovative Plastics | PC | LEXAN™ |
