Order Products : sales@su-jiao.com
Braskem PE SGE7252XP
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem America Inc. |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nL0huf_Braskem-PE-SGE7252XP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description: SGE7252XP is a bimodal high density polyethylene specially developed to manufacturing of caps and closures to beverages and soft drinks. This grade offers a good balance between chemical and mechanical resistance, good processability and organoleptic properties. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Caps and closures for carbonated beverages. Process: Injection Molding. Additives: Slip Agent. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 2.00 mm, 10% Igepal, Compression Molded, F50) | 40.0 | hr | ASTM D1693B |
| Full Notch Creep Test | > 1.0 | day | Internal Method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Biobased Content | > 94 | % | ASTM D6866 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Compression Molded | 26.0 | MPa | |
| Break, Compression Molded | 14.0 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Yield, Compression Molded | 9.0 | % | |
| Break | 400 | % | |
| Flexural Modulus (Compression Molded) | 1200 | MPa | ISO 178 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 3M™ Dyneon™ TFM™ Modified PTFE TFM 1635 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ TFM™ Modified PTFE |
| Akulon® K240-HP | DSM Engineering Plastics | Nylon 6 | Akulon® |
| ALTECH® PA6 B 1000/209 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| HiFill FR® PA6 GF15 FR-N | Techmer Engineered Solutions | Nylon 6 | HiFill FR® |
| Dryflex® SE 45A301 | ELASTO | TPE | Dryflex® |
