Order Products : sales@su-jiao.com
Retpol® 7555 HS UV2
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | PolyPacific Pty. Ltd. |
| Trademark: | Retpol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nIldRg_Retpol-7555-HS-UV2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Epalex 7555 HS UV2 is a thermoplastic rubber modified mineral filled polypropylene compound. It is a high flow injection moulding grade developed for high impact strength at sub-zero temperatures whilst maintaining good rigidity at high ambient temperatures. It is stabilized to meet automotive heat ageing and interior UV requirements. It is a highly scratch resistant grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 22 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.00 mm) | 0.60 to 0.80 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore D, 3.00 mm | 67 | ||
| Shore D, 15 sec, 3.00 mm | 57 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(3.00 mm) | 20.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 3.00 mm) | 100 | % | ASTM D638 |
| Flexural Modulus (3.00 mm) | 2000 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C, 3.00 mm | 90 | J/m | |
| 0°C, 3.00 mm | 260 | J/m | |
| 23°C, 3.00 mm | 520 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.00 mm) | 115 | °C | ASTM D648 |
| CLTE - Flow (-30 to 30°C, 3.00 mm) | 6.0E-5 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Suggested Max Regrind | 10 | % | |
| Processing (Melt) Temp | 200 to 260 | °C | |
| Mold Temperature | 20.0 to 60.0 | °C | |
| Injection Rate | Moderate-Fast |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ProtoTherm 12110 | DSM Somos® | Unspecified | ProtoTherm |
| Vyncolit® FS-10-V0 | Vyncolit N.V. | DAP | Vyncolit® |
| Zhongfa ABS FR-N | Yuyao Zhongfa Engineering Plastics Co. Ltd. | ABS | Zhongfa |
| GAPEX® FPP40GR16NA | Ferro Corporation | PP Homopolymer | GAPEX® |
| Hytrel® PC938 NC010 | DuPont Performance Polymers | TPC-ET | Hytrel® |
