Order Products : sales@su-jiao.com
Borealis PP MS65T40
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Borealis AG |
| Trademark: | Borealis PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nIg8mc_Borealis-PP-MS65T40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MS65T40 is a 40% mineral filled polypropylene compound intended for injection moulding. This material has excellent balanced mechanical properties and is easy to process. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.24 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.90 | % | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness (H 358/30) | 82.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 3500 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, Injection Molded) | 30.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield, Injection Molded) | 3.2 | % | ISO 527-2/50 |
| Flexural Modulus 1(Injection Molded) | 3700 | MPa | ISO 178 |
| Flexural Stress (Injection Molded) | 46.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Injection Molded) | 2.5 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -20°C, injection molding | 10 | kJ/m² | ISO 179/1eU |
| 23°C, injection molding | 20 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact (23°C, Injection Molded) | 2.5 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength | ISO 180/1U | ||
| -20°C, injection molding | 9.0 | kJ/m² | ISO 180/1U |
| 23°C, injection molding | 14 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 120 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 72.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 152 | °C | ISO 306/A |
| -- | 96.0 | °C | ISO 306/B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 220 - 260 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Holding Pressure | 3.00 - 6.00 | MPa |
| Injection instructions |
|---|
| Feeding Temperature: 40 to 80°CBack Pressure: Low to MediumScrew Speed: Low to MediumFlow Front Speed: 100 to 200 m/min |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NORYL™ PX1390 resin | SABIC Innovative Plastics | PPE+PS | NORYL™ |
| Axiall PVC 8858 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| KER® 1789 | Synthos S.A. | SBR, Emulsion | KER® |
| KOPA® KN133HB30HIBL | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
| Jampilen EP448S | Jam Polypropylene Company | PP Copolymer | Jampilen |
