Order Products : sales@su-jiao.com
SureSpec LD20-004
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nGKFrN_SureSpec-LD20-004.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LD20-004 is a certified prime resin designed for Blown films requiring good strength, excellent shrink, and good optics and abrasion resistance. It features easy processability with a minimum recommended film thickness of 2 mils. LD20-004 contains no slip and a medium level of antiblock. LD20-004 complies with FDA regulation 21CFR 177.1520(c) 2.2, conditions of use B-H. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.40 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 50 | µm | |
| Dart Drop Impact (50 µm) | 220 | g | ASTM D1709A |
| Elmendorf Tear Strength - MD (50 µm) | 110 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 98.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 111 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Edgetek™ X AS/018 NC704 | PolyOne Corporation | ABS | Edgetek™ |
| Karina MBU RED E 42/404-IE | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| LNP™ STAT-KON™ RX10004 compound | SABIC Innovative Plastics Europe | Nylon 66 | LNP™ STAT-KON™ |
| Paracril® N41 | INSA | NBR | Paracril® |
| Sumiliteresin® PR-2243 I | SBHPP | Phenolic | Sumiliteresin® |
