Monprene® MP-2465A Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene MP-2465A is a general purpose thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene MP-2465A is a lubricated, medium hardness grade, suitable for injection molding and extrusion.

General Information
Features	High density smoothness Low liquidity Lubrication Fill Medium hardness
Uses	Safety equipment Handle Washer Pipe fittings Sporting goods Stationery Consumer goods application field
RoHS Compliance	RoHS compliance
Appearance	Opacity Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.18	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.50	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	78	ASTM D2240
Shore A, 5 seconds, injection molding	75	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
Transverse flow : 100% strain	2.99	MPa	ASTM D412
Flow : 100% strain	3.89	MPa	ASTM D412
Transverse flow : 300% strain	4.02	MPa	ASTM D412
Flow : 300% strain	4.97	MPa	ASTM D412
Tensile Strength ²			ASTM D412
Transverse flow : Fracture	10.6	MPa	ASTM D412
Flow : Fracture	8.29	MPa	ASTM D412
Tensile Elongation ³			ASTM D412
Transverse flow : Fracture	710	%	ASTM D412
Flow : Fracture	590	%	ASTM D412
Tear Strength ⁴			ASTM D624
Transverse flow	39.6	kN/m	ASTM D624
Flow	36.8	kN/m	ASTM D624
Compression Set ⁵			ASTM D395B
23°C, 22 hr	29	%	ASTM D395B
70°C, 22 hr	63	%	ASTM D395B

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	227 - 249	°C
Middle Temperature	227 - 249	°C
Front Temperature	227 - 249	°C
Nozzle Temperature	227 - 249	°C
Processing (Melt) Temp	227 - 249	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 5.52	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	216 - 238	°C
Cylinder Zone 2 Temp.	216 - 238	°C
Cylinder Zone 3 Temp.	216 - 238	°C
Cylinder Zone 4 Temp.	216 - 238	°C
Cylinder Zone 5 Temp.	216 - 238	°C
Die Temperature	216 - 238	°C

Extrusion instructions
螺杆转速30 - 100 rpm

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	nFqWtF_MonpreneMP2465A.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Nanjing Hongrui PA66 A305	Nanjing Hongrui Engineering Plastics Co., Ltd.	Nylon 66	Nanjing Hongrui PA66
ALCOM® PA66 910/1.2 CF30	ALBIS PLASTIC GmbH	Nylon 66	ALCOM® PA66
Ferro PP LPP50BC73NA	Ferro Corporation	PP Homopolymer	Ferro PP
Dynaglide® DW 645	DeWAL Industries	PTFE	Dynaglide®
LubriOne™ LB9800-8002 AR Black	PolyOne Corporation	PEEK	LubriOne™