Order Products : sales@su-jiao.com
KOPEL® KP3339HM
| Category: | TPC-ET , Thermoplastic Copolyester Elastomer |
| Manufacturer: | Kolon Plastics, Inc. |
| Trademark: | KOPEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nFmgb9_KOPEL-KP3339HM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KOPEL® KP3339HM is a Thermoplastic Copolyester Elastomer (TPC-ET) product. It is available in Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (210°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.0 | % | ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 60% RH) | 0.050 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 39 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 1100 | % | ASTM D638 |
| Flexural Modulus (23°C) | 63.7 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) | 3.00 | mg | ASTM D1044 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 180 | °C | ASTM D3418 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Resilience | 67 | % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resirene READ 9400 RAF | Resirene, S.A. de C.V. | PS (HIPS) | Resirene |
| Starex GA-4025 | SAMSUNG SDI CO., LTD. | ABS | Starex |
| Veroplas PA2009L | PlastxWorld Inc. | Nylon 6 | Veroplas |
| Ghaed SAN SAN-4 | Ghaed Basir Petrochemicals Co. | SAN | Ghaed SAN |
| KOPELEN J-360 | Lotte Chemical Corporation | PP Impact Copolymer | KOPELEN |
