Order Products : sales@su-jiao.com
OnFlex™ S KG 60A-3S2018
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | OnFlex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nERAGe_OnFlex-S-KG-60A-3S2018.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| OnFlex™-S KG thermoplastic elastomer polymer is mixed with hydrogenated styrene block copolymer. This series of polymers has good compatibility and can provide excellent adhesion to polyamide polymer materials, such as PA6, PA6.6, PA11 and PA12. OnFlex-S KG polymer can be processed by 2K molding or multiple injection molding, plug-in molding or co-extrusion. In addition, OnFlex™-S KG polymer has good processability, good cost performance, wide hardness range, good coloring and mechanical properties. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 60 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.20 | MPa | ISO 37 |
| Tensile Stress (Break) | 3.50 | MPa | ISO 37 |
| Tensile Elongation (Break) | 290 | % | ISO 37 |
| Tear Strength | 21 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 32 | % | ISO 815 |
| 70°C, 22 hr | 62 | % | ISO 815 |
| 100°C, 22 hr | 81 | % | ISO 815 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| General Material Type | Styrene thermoplastic elastomers (TES) | ||
| 各项属性值是采用注射模制基板测量得出。 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 200 - 260 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Anjatech® 250-E/GF15 | Almaak International GmbH | Nylon 6 | Anjatech® |
| Delta ATL C9 | Delta Polymers | Acetal (POM) Copolymer | Delta |
| Kemcor MD 0898 | Qenos Pty Ltd | MDPE | Kemcor |
| REV Materials 8009 | REV Materials | Polyolefin, Unspecified | REV Materials |
| ULTEM™ 2310R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
