Order Products : sales@su-jiao.com
Plastiglas Sensacryl® Ultra
| Category: | Acrylic, Unspecified , Acrylic |
| Manufacturer: | Plastiglas de Mexico S.A de C.V. |
| Trademark: | Plastiglas |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nCNC9q_Plastiglas-Sensacryl-Ultra.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sensacryl Ultra is a sanitary grade cell cast acrylic sheet with outstanding thermoforming properties, chemical and stain resistance and it is the best alternative for the design and fabrication of Bathtubs; shower trays, shower enclosures,bath panels,special needs baths,etc. Sensacryl Ultra can be produced in whites, pastels, bolds and marbles in a wide variety of sizes and thickness. Color matching and cut-to-size for specific requirements are available upon request. (see Table 2 for details). Sensacryl Ultra acrylic sheet has been submitted to an approved outside laboratory for compliance to the ANSI-Z-124.1, and EN-263:1997 standards for plastic materials used in hot tubs and associated equipment. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Water Absorption (23°C, 24 hr) | 0.20 to 0.30 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 90 to 92 | ASTM D785 | |
| Barcol Hardness | 38 to 40 | ASTM D2583 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2210 | MPa | ASTM D638 |
| Tensile Strength | 65.5 to 72.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 to 7.0 | % | ASTM D638 |
| Flexural Strength | 96.5 to 110 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 21 to 32 | J/m | ASTM D256 |
| Gardner Impact | 1.58 | J | ASTM D3029 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 91.1 | °C | ASTM D648 |
| Melting Temperature | 170 to 190 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2282 LF TFE 15 | RTP Company | PEEK | RTP |
| Titacon® GF920TF10 | Titan Plastics Compounds Co., Ltd. | Acetal (POM) Copolymer | Titacon® |
| WACKER® FC 205 | Wacker Chemie AG | Silicone | WACKER® |
| BJB Polyurethane WC-590 FR A/B | BJB Enterprises, Inc. | TSU | BJB Polyurethane |
| Innova Clear R 350L G2 | Innova SA | PS (HIPS) | Innova |
