Order Products : sales@su-jiao.com

Fluon® PTFE CD097E

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	Asahi Glass Co., Ltd.
Trademark:	Fluon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	nBb7y8_Fluon-PTFE-CD097E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing PFOA. The CD grade products can be used in seal tapes, stretch films, tubes, small diameter rods, electrical wire coatings, etc., by paste extrusion with an aid. The CD grade products are easily fibrillated by the application of shearing force. They can therefore be used as flame retardant additives to improve the melt tension of thermoplastic resin. Only very small amounts confer the flame retardant effects. Applications: Fine tubes Electrical wire coatings Characteristics: High RR Excellent transparency

Message

The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing PFOA.

The CD grade products can be used in seal tapes, stretch films, tubes, small diameter rods, electrical wire coatings, etc., by paste extrusion with an aid.
The CD grade products are easily fibrillated by the application of shearing force. They can therefore be used as flame retardant additives to improve the melt tension of thermoplastic resin. Only very small amounts confer the flame retardant effects.

Applications:

Fine tubes

Electrical wire coatings

Characteristics:

High RR

Excellent transparency

General Information
Additive	Flame Retardant
Features	Copolymer Flame Retardant High Clarity
Uses	Coating Applications Electrical/Electronic Applications Tubing Wire & Cable Applications
Forms	Powder

Physical	Nominal Value	Unit
Specific Gravity	2.18	g/cm³
Apparent Density	0.50	g/cm³

Additional Information	Nominal Value	Unit	Test Method
Extrusion Pressure ¹	0.900		Internal Method
Median Particle Size	550.0	µm
Reduction Ratio	250 to 4000

Note Message
1 .	20° die angle, 16% ISOPAR H, and RR=1000

Resin Grade	Manufacturer	Category	Trademark
Tecomid® NB40 NL FY70	Eurotec Engineering Plastics	Nylon 6	Tecomid®
Therma-Tech™ X TT3300-8704 EI FR	PolyOne Corporation	PBT	Therma-Tech™
FARBOSET® 2461	Cosmic Plastics, Inc.	Epoxy	FARBOSET®
LUVOCOM® 50/TF/15/GY04	Lehmann & Voss & Co.	PC	LUVOCOM®
Shida 2518	JINJIANG City SHIDA Plastic Fine Co., Ltd.	TPE	Shida