Order Products : sales@su-jiao.com
Andur 85 APLF/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | n7czgG_Andur-85-APLF-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 85 APLF is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer containing 0.1% or less free TDI. An elastomer with a hardness of 83-85 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, and by the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 84 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 5.34 | MPa | ASTM D412 |
| 300% strain | 10.6 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 29.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 450 | % | ASTM D412 |
| Bayshore Resilience | 60 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 15 - 20 | min | |
| Demold Time (100°C) | 40 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 83 to 85Die C Tear, ASTM D1004: 310 pliAverage Split Tear, ASTM D1938: 55 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 85 APLF: 160-180°F Curene 442: 230-240°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 2103-25 CR-SX | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| Stylac™ AE850 | Asahi Kasei Chemicals Corporation | ABS | Stylac™ |
| THERMOLAST® K TF5PEN (Series: FC/AD/PE) | KRAIBURG TPE | TPE | THERMOLAST® K |
| DINALON® A1S25 B30 | Grupo Repol | Nylon 66 | DINALON® |
| KOPLA PA66 KDG1050 | KOPLA Co., Ltd. | Nylon 66 | KOPLA PA66 |
