Order Products : sales@su-jiao.com
ALCUDIA® HDPE M5204
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | n6N4vq_ALCUDIA-HDPE-M5204.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALCUDIA® M5204 is a low melt flow rate high density polyethylene with narrow molecular weight distribution. It offers adequate processing properties for production of monofilaments with the highest tensile strength at break, mainly using processing lines with two long stretching ovens. TYPICAL APPLICATIONS ALCUDIA® M5204 gives the highest tenacity monofilaments designed for top products of technical applications:
Recommended melt temperature range from 210 to 240°C. Processing conditions should be optimised for each production line. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 230°C/2.16 kg | 0.46 | g/10 min | ISO 1133 |
| 230°C/21.6 kg | 13 | g/10 min | ISO 1133 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 - 240 | °C |
| Extrusion instructions |
|---|
| Stretching Ratio: 8 to 13 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SIBUR PP H250 GP/2 | SIBUR, LLC | PP Homopolymer | SIBUR PP |
| Styrolux® 3G55 | INEOS Styrolution Group GmbH | SBC | Styrolux® |
| Estane® ALR E87A-V TPU | Lubrizol Advanced Materials, Inc. | TPU, Unspecified | Estane® |
| PALBLEND® R 45 | pal plast GmbH | PC+ABS | PALBLEND® |
| POLYLAC® PA-777C | CHI MEI CORPORATION | ABS | POLYLAC® |
