| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UMERIT® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | n36YWQ_UMERIT-500F.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
UBE super polyethylene UMERIT® are ethylene alpha-olefin copolymers produced using metallocene catalyst by gas phase process. The metallocene catalytic method results in superior physical properties by being able to acquire any targeted molecular structures. Therefore UMERIT®500F offer various excellent properties: -Superior low temperature seal property, advantageous compared to 1500F -Reduced motor load at processing -Draw resonance at high-speed drawing hardly occurs |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.904 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 4.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 44 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 42.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 720 | % | ASTM D638 |
| Flexural Modulus | 140 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 81.0 | °C | ASTM D1525 |
| Melting Temperature | 87.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 A HS MS | RTP Company | Nylon 6 | RTP |
| Nycal™ 1850T1H | Technical Polymers, LLC | Nylon 6 | Nycal™ |
| Adell Polyamide AC-10 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| Akulon® F232 | DSM Engineering Plastics | Nylon 6 | Akulon® |
| LEXAN™ HFD1830 resin | SABIC Innovative Plastics | PC | LEXAN™ |