Order Products : sales@su-jiao.com
Edgetek™ PI-40GF/000 BLACK
| Category: | PEI , Polyether Imide |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Edgetek™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | n2LDnT_Edgetek-PI-40GF-000-BLACK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Edgetek™PI-40GF/000 BLACK is a polyetherimide (PEI) product that contains a 40% glass fiber reinforced material. It can be processed by injection molding and is available in the Asia-Pacific region. The main characteristics are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.60 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.10 - 0.40 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 11000 | MPa | ASTM D638 |
| Tensile Strength 2 | 172 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 2.5 | % | ASTM D638 |
| Flexural Modulus 4 | 11000 | MPa | ASTM D790 |
| Flexural Strength 5 | 241 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm) | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.20 mm) | 209 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.60 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 135 - 150 | °C | |
| Drying Time | 4.0 - 5.0 | hr | |
| Rear Temperature | 350 - 400 | °C | |
| Middle Temperature | 350 - 400 | °C | |
| Front Temperature | 350 - 400 | °C | |
| Mold Temperature | 135 - 165 | °C |
| Injection instructions |
|---|
| Injection Pressure: MED-HIGHHold Pressure: MED-HIGHScrew Speed: MODERATEBack Pressure: LOW |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nypol® PA B3 G35 HS PRTA011 NT391 MSP | Petropol Industry and Trade of Polymers LTDA | Nylon 6 | Nypol® PA |
| HiFill® PSU GF10 | Techmer Engineered Solutions | PSU | HiFill® |
| LONGLITE® PBT 4115-104D | CCP Group | PBT | LONGLITE® PBT |
| Lucon® CP6092 | LG Chem Ltd. | PC | Lucon® |
| INDURE™ X225-UV SILH | LyondellBasell Industries | Polyolefin, Unspecified | INDURE™ |
