Order Products : sales@su-jiao.com
Forprene® 6NM001D40
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Forprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | n01dXM_Forprene-6NM001D40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Forprene® 6NM001D40 is a Thermoplastic Vulcanizate (TPV) material. It is available in Europe, Latin America, or North America for injection molding. Primary attribute of Forprene® 6NM001D40: REACH Compliant. Typical applications include:
|
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 41 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 8.10 | MPa | ASTM D412 |
| Tensile Strength 2 | 17.0 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 630 | % | ASTM D412 |
| Tear Strength 4 | 65.0 | kN/m | ASTM D624 |
| Compression Set 5(70°C, 22 hr) | 61 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Rear Temperature | 150 | °C | |
| Middle Temperature | 160 | °C | |
| Front Temperature | 170 | °C | |
| Nozzle Temperature | 175 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| 5 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Geon™ Vinyl Rigid Molding M7500 | PolyOne Corporation | PVC Alloy | Geon™ Vinyl Rigid Molding |
| Halar® 500LC | Solvay Specialty Polymers | ECTFE | Halar® |
| I. Stern 1320NA | I. STERN & CO. INC. | PP Homopolymer | I. Stern |
| OmniLon™ PA6 GR30 | OMNI Plastics, LLC | Nylon 6 | OmniLon™ |
| Polimid B 30 GF EM2 | Poliblend S.p.a. | Nylon 6 | Polimid B |
