Order Products : sales@su-jiao.com
WPP PP PPH2CF2-Black
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Washington Penn Plastic Co. Inc. |
| Trademark: | WPP PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mzrIil_WPP-PP-PPH2CF2-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Properties shown below for this compound are typical for a calcium-filled polypropylene homopolymer. This product satisfies many application needs. Special compounds are available to meet application requirements |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 26.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 490 | % | ASTM D638 |
| Flexural Modulus 3 | 1400 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 97.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 59.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Tested at 23 ± 2°C (73.4 ± 3.6°F) and 50 ± 5% relative humidity unless otherwise noted. |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP EMI 2160.5 | RTP Company | PEI | RTP |
| Abstron SE45I | Bhansali Engineering Polymers Limited | ABS | Abstron |
| Diamond ASA S170 | Network Polymers, Inc. | ASA | Diamond ASA |
| Flontech® FT-1-TUR-6 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Durethan® DP BM 65 X FM30 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
