Order Products : sales@su-jiao.com
PONYL 4006G25
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | POLYROCKS CHEMICAL CO., LTD |
| Trademark: | PONYL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mvuFLu_PONYL-4006G25.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PONYL-4006G(+) are alkali-free environmental glass fiber reinforced PA6 material. They have the characteristics of wear resistance,heat resistance,oil resistance and chemical resistance;and also the characteristics of low equilibrium water absorption,small mould shrinkage,good dimensional stability and superior mechanism strength. 4006G(+) pass UL test and meet the requirements of RoHS, SVHC, PFOS&PFOA, 16P, Halogen-free and PAHs. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (235°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.20 to 0.80 | % | ASTM D955 |
| Water Absorption (Equilibrium) | 2.1 to 2.5 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 160 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 12 | % | ASTM D638 |
| Flexural Modulus | 6800 | MPa | ASTM D790 |
| Flexural Strength | 240 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 207 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index | 575 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | HB | ||
| 3.00 mm | HB |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU E995 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| Ultraform® N 2200 G53 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| Nymax™ GF 1200 A 55 HS Natural | PolyOne Corporation | Nylon 66 | Nymax™ |
| DuraFlex 767 | Evermore Chemical Industry Co., Ltd. | TPU-Polyester | DuraFlex |
| ESTOPLAST XU 64001NN01 | Ester Industries Ltd. | Nylon 66 | ESTOPLAST XU |
