Order Products : sales@su-jiao.com
Bormed™ HE7541-PH
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Bormed™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mtgeM1_Bormed-HE7541-PH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Bormed HE7541-PH is a resin intended for evaluation for use in Healthcare applications. Bormed HE7541-PH is a bimodal high-density polyethylene typically used in articles produced via injection moulding. This grade combines high environmental stress crack resistance and easy processing. Material can be sterilised with ethylene oxide, steam and radiation up to 35 kGy; as a result of sterilisation by radiation some minor yellowing can occur. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.0 to 2.0 | % | |
| Environmental Stress-Cracking Resistance (10% Antarox, F50) | 40.0 | hr | ASTM D1693A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 61 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 850 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, Injection Molded) | 22.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield, Injection Molded) | 10 | % | ISO 527-2/50 |
| Flexural Modulus | 950 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength (23°C) | 80.0 | kJ/m² | ISO 8256/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 65.0 | °C | ISO 75-2/B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 190 to 250 | °C | |
| Mold Temperature | 10.0 to 40.0 | °C | |
| Injection Rate | Fast |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Qenos PE GF7740F2 | Qenos Pty Ltd | HDPE, MMW | Qenos PE |
| Axiall PVC 12804 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Conpol™ 5B10S1 | DuPont Packaging & Industrial Polymers | EMAA | Conpol™ |
| HiFill® HDPE GF30 | Techmer Engineered Solutions | HDPE | HiFill® |
| Politer 30 GF V0A | Poliblend S.p.a. | PBT | Politer |
