Order Products : sales@su-jiao.com
Estane® ETE 70DT3 TPU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mo0xHd_Estane-ETE-70DT3-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® ETE 70DT3 is an aromatic polyether-based thermoplastic polyurethane TPU. Features: Hard TPU with wide extrusion processing window and melt stability, low temperature flexibility, high transparency and UV stability Uses: Extrusion; Hose and Tube, Profile, Cable Jacket; Injection Molding; Various |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 5 sec) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 64.0 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 19.0 | MPa | ASTM D412 |
| 300% strain | 41.0 | MPa | ASTM D412 |
| Tensile Strength (Break) | 52.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 360 | % | ASTM D412 |
| Tear Strength | |||
| -- 1 | 210 | kN/m | ASTM D624 |
| Cracking | 33 | kN/m | ASTM D470 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -22.0 | °C | DSC |
| Melting Temperature | 200 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 204 | °C | |
| Cylinder Zone 2 Temp. | 210 | °C | |
| Cylinder Zone 3 Temp. | 216 | °C | |
| Cylinder Zone 4 Temp. | 216 | °C | |
| Adapter Temperature | 216 | °C | |
| Melt Temperature | 213 | °C | |
| Die Temperature | 218 | °C |
| Extrusion instructions |
|---|
| Dew Point: -40°CScreen Pack Recommendation: 20/40/80/20 |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rhelon G1025-00 | RheTech, Inc. | Nylon 6 | Rhelon |
| ALCUDIA® EBA CA-7220B | REPSOL | EBA | ALCUDIA® EBA |
| Latilub 87/28-12T G/20 | LATI S.p.A. | PC | Latilub |
| LNP™ LUBRICOMP™ DEL34E compound | SABIC Innovative Plastics Asia Pacific | PC | LNP™ LUBRICOMP™ |
| Sylvin 8611-85 Clear Yellow 4189 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
