Order Products : sales@su-jiao.com
Generic Polyarylate
| Category: | Polyarylate , Polyarylate |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mneDIN_Generic-Polyarylate.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Polyarylate This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 to 1.36 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.79 to 0.81 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.12 to 0.75 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 105 to 125 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 53.0 to 72.8 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 2.5 to 82 | % | ASTM D638 |
| Flexural Modulus (23°C) | 1100 to 2660 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 76.0 to 105 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 76.0 to 86.0 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 43 to 450 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 110 to 176 | °C | ASTM D648 |
| CLTE - Flow | 6.0E-5 to 7.4E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 1.0E+14 to 2.1E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength (23°C) | 24 to 39 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C) | 2.60 to 3.77 | ASTM D150 | |
| Dissipation Factor (23°C) | 0.010 to 0.040 | ASTM D150 | |
| Arc Resistance | 79.3 to 128 | sec | ASTM D495 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance | 87.0 to 88.1 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® ET3227 | Covestro - Polycarbonates | PC | Makrolon® |
| BJB Silicone TC-5027 A/B | BJB Enterprises, Inc. | Silicone | BJB Silicone |
| HiFill® PA6/6 GFB20 | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| Kingfa PA66-RG301 | Kingfa | Nylon 66 | Kingfa |
| KOPLA PA66 KDG1030ST | KOPLA Co., Ltd. | Nylon 66 | KOPLA PA66 |
