Order Products : sales@su-jiao.com
ISPLEN® PM 281 EV
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | REPSOL |
| Trademark: | ISPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mmpT8I_ISPLEN-PM-281-EV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polypropylene copolymer, 20% mineral fillers reinforced and good melt flow rate. ISPLEN PM281 EV was designed showing a high stiffness with a good impact resistance, and a low warpage and high shrinkage behaviour. It shows really good gloss surface and an excellent scratch resistance. The product is UV stabilised. APPLICATIONS Automotive:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.06 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 21 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 21.0 | MPa | ISO 527-2 |
| Flexural Modulus | 2200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | ISO 180 | ||
| -40°C | 2.0 | kJ/m² | |
| 0°C | 3.5 | kJ/m² | |
| 23°C | 4.0 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 103 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 55.0 | °C | ISO 75-2/A |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | 98 | mm/min | ISO 3795 |
| Fogging | 98 | mm/min | FLTM BO 116-03 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trilliant™ HC HC3320-0020 RS Natural | PolyOne Corporation | PBT | Trilliant™ HC |
| NOVALAC RX®613 | Vyncolit N.V. | Phenolic | NOVALAC |
| CGPC PVC SO-30X (50 phr Plasticizer C) | China General Plastics Corporation | PVC, Flexible | CGPC PVC |
| ISORENE™ A3-1001 | SABIC Innovative Plastics Europe | TPE | ISORENE™ |
| 3M™ Dyneon™ Fluoroelastomer FPO 3632 | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
