Order Products : sales@su-jiao.com

Epolene® E-20

Category:	MDPE , Medium Density Polyethylene
Manufacturer:	Westlake Chemical Corporation
Trademark:	Epolene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	mlxn1I_Epolene-E-20.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Epolene E-20 is a medium density, low molecular-weight oxidized polyethylene with exceptional hardness and low color. It has a low softening point and low viscosity, which give it the same desirable emulsification properties of a low-density oxidized polyethylene. The low softening point and low viscosity contribute to the hardness, short drying time, and excellent gloss in coatings. Pressure equipment is required for emulsification of this material. Epolene E-20 is an excellent performer in high-speed, buffable floor finishes. It improves buffability and durability.

Message

Epolene E-20 is a medium density, low molecular-weight oxidized polyethylene with exceptional hardness and low color. It has a low softening point and low viscosity, which give it the same desirable emulsification properties of a low-density oxidized polyethylene. The low softening point and low viscosity contribute to the hardness, short drying time, and excellent gloss in coatings. Pressure equipment is required for emulsification of this material. Epolene E-20 is an excellent performer in high-speed, buffable floor finishes. It improves buffability and durability.

General Information
Features	Durable Good Toughness High Gloss High Hardness Low Molecular Weight Low Viscosity
Uses	Adhesives Automotive Applications Building Materials Coating Applications Construction Applications Flooring Maintenance/Repair Plastics Modification
Forms	Pellets

Physical	Nominal Value	Unit
Acid Number	17.00	mg KOH/g
Molecular Weight ¹	7500

Thermal	Nominal Value	Unit	Test Method
Softening Point - Mettler	111	°C	ASTM E28

Additional Information	Nominal Value	Unit	Test Method
Penetration Hardness ²(25°C)	< 100	mm	ASTM D5

Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (125°C)	1500	mPa·s

Note Message
1 .	Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards
2 .	Needle under 100-g load for 5s, tenths of mm

Resin Grade	Manufacturer	Category	Trademark
Makroblend® AR205	Covestro - Polycarbonates	PC+PET	Makroblend®
RTP 2103 LF	RTP Company	PEI	RTP
Nypol® PA A3 G15 TZ NTLA010 NR374	Petropol Industry and Trade of Polymers LTDA	Nylon 66	Nypol® PA
INEOS PP R08S-00	INEOS Olefins & Polymers USA	PP Random Copolymer	INEOS PP
LNP™ KONDUIT™ OX11315 compound	SABIC Innovative Plastics Asia Pacific	PPS	LNP™ KONDUIT™