Order Products : sales@su-jiao.com
Ingeo™ 3801X
| Category: | PLA , Polylactic Acid |
| Manufacturer: | NatureWorks® LLC |
| Trademark: | Ingeo™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mlrH0o_Ingeo-3801X.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Ingeo 3801X, a NatureWorks LLC product is designed for injection molding applications that require high heat and high impact performance. This polymer grade has much more rapid crystallization kinetics than other Ingeo resin grades currently in the market place. The rapid crystallization rate allows for the molding of crystalline parts at competitive cycle times with high heat distortion temperatures. Ingeo 3801X is designed for injection molding applications where the property requirements are opaque molded parts with heat deflection temperatures between 150°F (65°C) and 285°F (140°C) that do not require food contact approvals. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.1 to 1.3 | % | ASTM D955 |
| Relative Viscosity | 3.10 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature - at 16.5 psi | 140 | °C | ASTM E2092 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2980 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 25.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 8.1 | % | ASTM D638 |
| Flexural Modulus | 2850 | MPa | ASTM D790 |
| Flexural Strength | 44.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 140 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 65.0 | °C | ASTM E2092 |
| Glass Transition Temperature | 45.0 | °C | ASTM D3417 |
| Peak Crystallization Temperature (DSC) | 155 to 170 | °C | ASTM D3418 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Moisture | < 0.010 | % | |
| Rear Temperature | 177 | °C | |
| Middle Temperature | 188 | °C | |
| Front Temperature | 188 | °C | |
| Nozzle Temperature | 188 | °C | |
| Processing (Melt) Temp | 188 | °C | |
| Mold Temperature | 85.0 to 105 | °C | |
| Injection Pressure | 31.0 to 55.0 | MPa | |
| Back Pressure | 1.70 | MPa | |
| Screw Speed | 125 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Miflon® 3213 | Jiangsu Meilan Chemical Co., Ltd. | PTFE | Miflon® |
| DuraElast 1730-70 | Evermore Chemical Industry Co., Ltd. | TPU-Polyester | DuraElast |
| EMERGE™ PC 4701-13 | Trinseo | PC | EMERGE™ |
| LAPEROS® B230 | Polyplastics Co., Ltd. | LCP | LAPEROS® |
| GLS 481-122 Natural | PolyOne Corporation | TPE | GLS |
