Order Products : sales@su-jiao.com
KRATON® D1101 B
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mkmTzF_KRATON-D1101-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1101 B is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from South America in the physical form(s) identified below.
Kraton D1101 B is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.938 | g/cm³ | ISO 2781 |
| Apparent Density | 0.40 | g/cm³ | ASTM D1895B |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | < 1.0 | g/10 min | ISO 1133 |
| Bound Styrene | 30.0 to 32.0 | % | Internal Method |
| Antioxidant Additive | > 0.10 | % | Internal Method |
| Ash Content | ISO 247 | ||
| BT | 0.3 to 0.6 | wt% | |
| BTM | < 5.0 | wt% | |
| Total Extractables | < 1.0 | % | Internal Method |
| Viscosity (25°C) 1 | 3.00 to 5.00 | Pa·s | Internal Method |
| Volatile Matter | < 0.30 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 10 sec, Compression Molded) | 70 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 2.90 | MPa | ISO 37 |
| Tensile Stress (Yield) | 33.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 880 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | Measured on 25% mass solution in toluene at 25°C using a Brookfield viscometer, LTF or LTV model |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® LL6F 803 | Marco Polo International, Inc. | LLDPE | MARPOL® |
| COPYLENE® CH200LN | Phillips 66 | PP Homopolymer | COPYLENE® |
| Hylon® N1000MDHL | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| Pacrel® 6375N | Nanjing Jinling OPTA Polymer Co., Ltd. | TPV | Pacrel® |
| Taizhou Plastic PA66 A5230 | Taizhou Plastic Co., Ltd. | Nylon 66 | Taizhou Plastic |
