Order Products : sales@su-jiao.com
EMOPLEN® HP MTF 5
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | EMAS Plastik San.Tic.AS. |
| Trademark: | EMOPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mgrV5q_EMOPLEN-HP-MTF-5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polypropylene %5 talcum filled |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.980 to 1.92 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 to 25 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.0 to 1.1 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 60 to 65 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1500 to 2500 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 25.0 to 35.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 15 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | > 4.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 90.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 90.0 | °C | ISO 306/B |
| Melting Temperature (DSC) | 160 | °C | ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Clariant PC PC-1100H30 | Clariant Corporation | PC | Clariant PC |
| Kingfa FW-620 | Kingfa | ABS | Kingfa |
| Sumikon® PM-6600 | SBHPP | Phenolic | Sumikon® |
| TechnoElast V D5000 I 2 se | TechnoCompound GmbH | TPE | TechnoElast |
| 3M™ Dyneon™ PTFE Compound TF 6718 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
