Order Products : sales@su-jiao.com
Deprene 251-90
| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | Shanghai Lin Gen Rubber Materials Co., Ltd. |
| Trademark: | Deprene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mgZ9IS_Deprene25190.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Deprene 251-90 is a polypropylene EPDM rubber (PP EPDM) material,. This product is available in the Asia-Pacific region and is processed by extrusion or injection molding. The main features of Deprene 251-90 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D297 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 90 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 7.90 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 240 | % | ASTM D412 |
| Tear Strength | 45.0 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -55.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.0 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 - 90 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 190 - 250 | °C | |
| Injection Pressure | 40.0 - 60.0 | MPa |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 170 - 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X4280 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| SEETEC LDPE XL610 | Lotte Chemical Corporation | LDPE | SEETEC LDPE |
| THERMOLAST® M TM5ADT (Series: MC/AD1) | KRAIBURG TPE | TPE | THERMOLAST® M |
| Iupilon® CLV1000 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| Plaslube® PEEK CF10 TL15 HF | Techmer Engineered Solutions | PEEK | Plaslube® |
