Order Products : sales@su-jiao.com
Kazan LDPE 15313-003 OKP 22 1111 2001
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Kazanorgsintez Joint Stock Company |
| Trademark: | Kazan LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mgMPu9_Kazan-LDPE-15313-003-OKP-22-1111-2001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GOST / TU: GOST 16337-77 LDPE is produced by means of polymerization of ethyiene under high pressure in tubular or stirred reactorwith the use of radical type initiator. LDPE is used for manufacturing of pipes, fittings, articles contacting with food, toys, films etc. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.919 to 0.922 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | |
| Environmental Stress-Cracking Resistance | > 500 | hr | |
| Extractables 1 | < 0.4 | % | |
| Melt Flow - Dispersin within a batch 2 | < 6.0 | % |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Number of Inclusions | > 2.00 | ||
| Odor Rating | < 1.00 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress | |||
| Yield | > 98.0 | MPa | |
| Break | > 137 | MPa | |
| Tensile Strain (Break) | > 600 | % |
| Note Message | |
|---|---|
| 1 . | Premium grade, Grade I, II |
| 2 . | ± |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| K-Resin® SBC BK10 | Chevron Phillips Chemical Company LLC | SBC | K-Resin® SBC |
| Huafon JF-D-NC8903 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| PermaStat® 604 | RTP Company | ABS | PermaStat® |
| PLUSTEK PA350M6 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
| GELOY™ EXGY0070 resin | SABIC Innovative Plastics | ASA | GELOY™ |
