Order Products : sales@su-jiao.com
Cosmic DAP D69/6130
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Cosmic Plastics, Inc. |
| Trademark: | Cosmic DAP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mg9YpO_Cosmic-DAP-D69-6130.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DESCRIPTION Cosmic D69 / 6130 is a long glass fiber filled, general purpose diallyl ortho phthalate molding compound which is supplied in a flake form. It can be easily molded in compression or transfer equipment and can be readily preformed for ease in handling. It can be stored at room temperature for two years without reducing performance. FEATURES D69 / 6130 combines the advantages of high impact strength, high insulation resistance, excellent compressive and flexural strength, and easy moldability. APPLICATIONS Structural parts, housings, terminals and insulators, or other applications requiring strength. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.72 | g/cm³ | |
| Bulk Factor | 6.0 | ||
| Molding Shrinkage - Flow | 0.10 to 0.40 | % | |
| Dimensional Stability | < 0.010 | % | |
| Water Absorption 1(Equilibrium, 50°C) | 0.30 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 41.4 to 68.9 | MPa | |
| Flexural Strength | 89.6 to 117 | MPa | |
| Compressive Strength | 165 to 207 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Notched Izod Impact | 160 to 320 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow (-40 to 100°C) | 2.4E-5 | cm/cm/°C | |
| Heat Distortion | 260 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Dielectric Breakdown | |||
| Dry | 62000 | V | |
| Wet | 60000 | V |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Water Extract Conductivity | 30.0 | µS/cm |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity | |||
| -- 2 | 5.0E+10 | ohms | |
| -- 3 | > 1.0E+16 | ohms | |
| Volume Resistivity | |||
| -- 4 | 5.0E+10 | ohms·cm | |
| -- 5 | > 1.0E+16 | ohms·cm | |
| Dielectric Strength 6 | |||
| Dry | 16 | kV/mm | |
| Wet | 14 | kV/mm | |
| Dielectric Constant | |||
| 1 kHz 7 | 4.20 | ||
| 1 kHz 8 | 4.00 | ||
| 1 MHz 9 | 4.10 | ||
| 1 MHz 10 | 3.90 | ||
| Dissipation Factor | |||
| 1 kHz 11 | 9.0E-3 | ||
| 1 kHz 12 | 6.0E-3 | ||
| 1 MHz 13 | 0.015 | ||
| 1 MHz 14 | 0.013 | ||
| Arc Resistance | 180 | sec |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 135 to 190 | °C | |
| Injection Pressure | 3.45 to 55.2 | MPa |
| Note Message | |
|---|---|
| 1 . | 48 hrs |
| 2 . | 30 days @ 100% RH @ 70°C |
| 3 . | As Is |
| 4 . | 30 days @ 100% RH @ 70°C |
| 5 . | As Is |
| 6 . | Method B (Step-by-Step) |
| 7 . | Wet |
| 8 . | Dry |
| 9 . | Wet |
| 10 . | Dry |
| 11 . | Wet |
| 12 . | Dry |
| 13 . | Wet |
| 14 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® C4805 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| POLYFORT® FPP 3799 | A. Schulman Inc. | PP, Unspecified | POLYFORT® |
| Megalon® 122C | Mega Polymers | Nylon 66 | Megalon® |
| Celstran® +PP-GF30-04CN02/10 | Celanese Corporation | PP, Unspecified | Celstran® |
| Elastron® D D101.A83.B | Elastron USA, Inc. | SBS | Elastron® D |
