Order Products : sales@su-jiao.com
Thermoset Plastics DC-151
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mg0anS_Thermoset-Plastics-DC-151.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics DC-151 is an Epoxy; Epoxide (Epoxy) material. It is available in North America for laminating. Primary attribute of Thermoset Plastics DC-151: Impact Resistant. Typical application of Thermoset Plastics DC-151: Coating Applications |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 1.19 | g/cm³ | ASTM D1895 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 88 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 179 | MPa | ASTM D638 |
| Flexural Strength (Yield) | 241 | MPa | ASTM D790 |
| Compressive Strength | 279 | MPa | ASTM D695 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 1.0 Mix Ratio by Weight: 25 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 3.2 | ||
| Thermoset Mix Viscosity (25°C) | 2500 | cP | ASTM D2393 |
| Demold Time (25°C) | 960 to 1400 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 NG1 GF 30 HLS | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Sunny® PBT EN115 | Guangdong Shunde Shunyan New Material Co., Ltd. | PBT | Sunny® |
| VENYL SWGB307H | AD majoris | Nylon 6 | VENYL |
| Zhongfa PC/ABS CW-100-FR | Yuyao Zhongfa Engineering Plastics Co. Ltd. | PC+ABS | Zhongfa |
| Jackdaw PC DR15NT6341 | Jackdaw Polymers | PC | Jackdaw PC |
