Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Extrusion L4230
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Extrusion |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mf9gGG_Geon-Vinyl-Rigid-Extrusion-L4230.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Extrusion capstock for darker colors. This product is not recommended for horizontal, outdoor applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.26 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 sec) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2240 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 42.1 | MPa | ASTM D638 |
| Flexural Modulus | 2340 | MPa | ASTM D790 |
| Flexural Strength | 66.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| 10°C, 3.18 mm, Injection Molded | 530 | J/m | |
| 23°C, 3.18 mm, Injection Molded | 960 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Annealed, 3.18 mm 3 | 76.1 | °C | |
| 0.45 MPa, Annealed, 3.18 mm 4 | 78.9 | °C | |
| 1.8 MPa, Annealed, 3.18 mm, Compression Molded 5 | 72.8 | °C | |
| 1.8 MPa, Annealed, 3.18 mm, Compression Molded 6 | 77.8 | °C | |
| CLTE - Flow | 8.0E-5 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 to 210 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 182 to 193 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 51 mm/min |
| 2 . | Type I, 51 mm/min |
| 3 . | Annealed at 50 deg.C |
| 4 . | Annealed at 60 deg.C |
| 5 . | Annealed at 50 deg.C |
| 6 . | Annealed at 60 deg.C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMATOP PP HOMO 201NA | Amco Polymers | PP Homopolymer | PRIMATOP |
| RTP 2202 LF | RTP Company | PEEK | RTP |
| Wondel® B BN0 | Nanjing Julong Engineering Plastics Co., LTD | Nylon 6 | Wondel® B |
| Plaslube® PA6/6 CF10 TS15 BK | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
| Medalist® MD-555 | Teknor Apex Company | TPE | Medalist™ |
