Order Products : sales@su-jiao.com
Ateva® 4030AC
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Celanese EVA Performance Polymers |
| Trademark: | Ateva® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | meRA1h_Ateva-4030AC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin is commonly used for adhesives, sealants, solution coatings and as a gum stock for vulcanized compounds. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.962 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 55 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 40.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 5.00 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 1200 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 2.00 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 44.0 | °C | ASTM D3418 |
| Ring and Ball Softening Point | 107 | °C | ASTM E28 |
| Note Message | |
|---|---|
| 1 . | Type IV, 50 mm/min |
| 2 . | Type IV, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Beetafin庐 RV9009 | BIP (Oldbury) Limited | PUR-Ester | Beetafin® |
| Alcryn® 2360 NC | Advanced Polymer Alloys | MPR | Alcryn® |
| Gallonprene® GP540-8501(n)F | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| HI-ZEX™ 550P | Prime Polymer Co., Ltd. | HDPE | HI-ZEX™ |
| I. Stern SH-731 | I. STERN & CO. INC. | PS (HIPS) | I. Stern |
