Order Products : sales@su-jiao.com
RTP 1200 S-80A
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mbx8tl_RTP-1200-S-80A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RTP 1200 S-80A is a thermoplastic polyurethane elastomer (polyester)(TPU-polyester) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.90 | % | ASTM D955 |
| Moisture Content | 0.020 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 84 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 5.70 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 37.9 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 570 | % | ASTM D412 |
| Tear Strength 1 | 76.4 | kN/m | ASTM D624 |
| Compression Set 2(23°C, 22 hr) | 28 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 6.0 | hr | |
| Dew Point | -40.0 | °C | |
| Processing (Melt) Temp | 193 - 216 | °C | |
| Mold Temperature | 15.6 - 32.2 | °C | |
| Injection Pressure | 27.6 - 68.9 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | C mould |
| 2 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Novamid® 2330J | DSM Engineering Plastics | Nylon 66/6 | Novamid® |
| ALTECH® PP-B A 4920/578 MR20 | ALBIS PLASTIC GmbH | PP Copolymer | ALTECH® PP-B |
| Celanex® 3200-2FC | Celanese Corporation | PBT | Celanex® |
| KOPA® KN333G33HS | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
| Sylvin 6197A-85 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
