Order Products : sales@su-jiao.com
BMC 350
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Bulk Molding Compounds, Inc. |
| Trademark: | BMC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mbmBZo_BMC-350.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BMC 350 is a high gloss cosmetic appliance grade material with excellent heat and stain resistant properties. As with all BMCI compounds, this series can be supplied in logs, slugs or bulk. Typical applications are small appliance components, large appliance control panels, bases, handles and vent trim. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.85 to 1.95 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.10 to 0.30 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.15 to 0.25 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Barcol Hardness | 40 to 50 | ASTM D2583 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 41.4 to 48.3 | MPa | ASTM D638 |
| Flexural Modulus | 11000 to 12400 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 82.7 to 110 | MPa | ASTM D790 |
| Compressive Strength | 124 to 138 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 160 to 270 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 218 to 260 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (4.47 mm) | V-0 | UL 94 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 138 to 166 | °C | |
| Cylinder Zone 2 Temp. | 138 to 166 | °C | |
| Cylinder Zone 3 Temp. | 138 to 166 | °C | |
| Cylinder Zone 4 Temp. | 138 to 166 | °C | |
| Cylinder Zone 5 Temp. | 138 to 166 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® A HS 373 NER | Radici Plastics | Nylon 66 | Radilon® |
| ShinkoLite-P IR G-304 | Mitsubishi Rayon America Inc. | Acrylic (PMMA) | ShinkoLite-P |
| AZDEL™ C401-B01 | Azdel, Inc. | PP, Unspecified | AZDEL™ |
| HIPOLEN P® TA 3 | HIPOL A.D. | PP Homopolymer | HIPOLEN P® |
| Lotader® AX 8840 | Arkema | EMA | Lotader® |
