Order Products : sales@su-jiao.com
NORYL™ APS130 resin
| Category: | PPS+PPE , Polyphenylene Sulfide + PPE |
| Manufacturer: | SABIC Innovative Plastics Asia Pacific |
| Trademark: | NORYL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mbHlwG_NORYL-APS130-resin.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| NORYL™ APS130 resin is a Polyphenylene Sulfide + PPE (PPS+PPE) material. It is available in Asia Pacific for injection molding. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/5.0 kg) | 29 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.20 mm) | 0.25 to 0.70 | % | Internal Method |
| Water Absorption (24 hr) | 0.020 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 113 | MPa | Internal Method |
| Tensile Elongation (Break) | 8.0 | % | Internal Method |
| Flexural Modulus | 8430 | MPa | ASTM D790 |
| Flexural Strength | 157 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 88 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.20 mm) | 267 | °C | ASTM D648 |
| CLTE - Flow (-30 to 30°C) | 2.5E-5 to 5.5E-5 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | ASTM D257 |
| Dielectric Strength (1.60 mm, in Oil) | 22 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 50 Hz | 3.30 | ||
| 60 Hz | 3.30 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 to 149 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Drying Time, Maximum | 24 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Suggested Shot Size | 40 to 60 | % | |
| Rear Temperature | 282 to 316 | °C | |
| Middle Temperature | 288 to 321 | °C | |
| Front Temperature | 293 to 327 | °C | |
| Nozzle Temperature | 299 to 332 | °C | |
| Processing (Melt) Temp | 299 to 332 | °C | |
| Mold Temperature | 93.3 to 149 | °C | |
| Back Pressure | 0.689 to 1.38 | MPa | |
| Screw Speed | 50 to 100 | rpm | |
| Vent Depth | 0.025 to 0.076 | mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SITRALAC 9E-TF15 / C94150 | SITRAPLAS GmbH | ABS | SITRALAC |
| CERTENE™ HI-2053 | Muehlstein | HDPE | CERTENE™ |
| HiFill® PA6/6 0137 S2 | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| LUVOCOM® G | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| VALOX™ 457 resin | SABIC Innovative Plastics | PBT | VALOX™ |
