Order Products : sales@su-jiao.com
Alpha PVC 2212-100 CLEAR 0003
| Category: | PVC, Semi-Rigid , Semi-Rigid Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mawFC8_Alpha-PVC-2212-100-CLEAR-0003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 2212-100 CLEAR 0003 is a semi-rigid PVC formulation for injection molding. This compound presents excellent flow characteristics, low processing temperatures, superior heat stability and good mold release. 2212-100 CLEAR 0003 is designed to meet U.S. Pharmacopeia Class VI and cytotoxicity requirements for medical devices. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 to 1.32 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 87 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec, 6.35 mm) | 62 to 68 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 448 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, 1.91 mm | 28.5 | MPa | |
| Break, 1.91 mm | 28.3 | MPa | |
| Tensile Elongation (Break, 1.91 mm) | 220 | % | ASTM D638 |
| Flexural Modulus (3.18 mm) | 563 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 23.0 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 180 | kN/m | ASTM D1004 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 27 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 160 to 171 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 138 | °C | |
| Cylinder Zone 2 Temp. | 149 | °C | |
| Cylinder Zone 3 Temp. | 154 | °C | |
| Cylinder Zone 4 Temp. | 160 | °C | |
| Cylinder Zone 5 Temp. | 166 | °C | |
| Adapter Temperature | 166 | °C | |
| Melt Temperature | 166 to 174 | °C | |
| Die Temperature | 166 | °C |
| Note Message | |
|---|---|
| 1 . | Graves |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TKC PS | TKC Kunststoffe e.K. | PS (GPPS) | TKC |
| Daelim Po1y® LH-4100BL | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| Gallonprene® GP100-7502 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| JSR EPR EP51 | JSR Corporation | EPDM | JSR EPR |
| Lucky Enpla LAY3003R | Lucky Enpla Co LTD | PC+PBT | Lucky Enpla |
