Order Products : sales@su-jiao.com
ALCUDIA® HDPE 5203
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | maO6lc_ALCUDIA-HDPE-5203.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALCUDIA® 5203 is a high-density polyethylene copolymer of hexene, with middle molecular weight. It is specially designed to make, by blow molding-extrusion, up to 20 liters containers for liquid detergents and chemicals. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good mechanical properties and good level of both stiffness and environmental stress cracking resistance can be obtained with ALCUDIA® 5203 due to its molecular weight and density. TYPICAL APPLICATIONS Packaging of liquid detergents and chemical. Recommended melt temperature range from 180 to 200°C. Processing conditions should be optimised for each production line. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.950 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 0.20 | g/10 min | |
| 190°C/21.6 kg | 20 | g/10 min | |
| Environmental Stress-Cracking Resistance (50°C, 10% Igepal, F50) | 60.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 63 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 27.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 700 | % | ISO 527-2 |
| Flexural Modulus | 1100 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ISO 306/A |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 to 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide AG4 | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| Thermoset Plastics 340 No.70 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| UMG ABS® VD100 | UMG ABS, Ltd. | ABS | UMG ABS® |
| NuSil MED4-4220 | NuSil Technology | Silicone | NuSil |
| Estane® 2355-75A TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Estane® |
