Tecnoflon® FOR 9385F

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	mYvSDy_Tecnoflon-FOR-9385F.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 9385F is a medium viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68.5 % fluorine content. Tecnoflon® FOR 9385F is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals production, Tecnoflon® FOR 9385F greatly reduces the reject rate due to adhesion and molding problems. Some of the basic properties of Tecnoflon® FOR 9385F are: Superior bonding to metal Very good scorch safety Outstanding processability Lack of mold fouling Excellent hot tear resistance Excellent mold release Tecnoflon® FOR 9385F can be used for compression, injection and transfer molding of shaft seals, valve stem seals, O-rings, gaskets and seals. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Tecnoflon® FOR 9385F can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.

Message

TECNOFLON® FOR 9385F is a medium viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68.5 % fluorine content. Tecnoflon® FOR 9385F is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals production, Tecnoflon® FOR 9385F greatly reduces the reject rate due to adhesion and molding problems.

Some of the basic properties of Tecnoflon® FOR 9385F are:

Superior bonding to metal

Very good scorch safety

Outstanding processability

Lack of mold fouling

Excellent hot tear resistance

Excellent mold release

Tecnoflon® FOR 9385F can be used for compression, injection and transfer molding of shaft seals, valve stem seals, O-rings, gaskets and seals. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Tecnoflon® FOR 9385F can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.

General Information
Features	Bondability Good Adhesion Good Mold Release Good Processability Good Tear Strength Medium Viscosity Terpolymer
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet Valves/Valve Parts
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	45	MU
Fluorine Content ²	69	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
Tarnoform® 500 GF2	Grupa Azoty S.A.	Acetal (POM) Copolymer	Tarnoform®
Thermec™ 6250R40	Technical Polymers, LLC	PPS	Thermec™
Nipol® NBR N1201L	Zeon Corporation	NBR	Nipol® NBR
Elastollan® 565 A P	BASF Polyurethanes GmbH	TPU-Polyester	Elastollan®
Hylon® N1000EHL	Ravago Manufacturing Americas, LLC	Nylon 66	Hylon®