Order Products : sales@su-jiao.com
Thermoset Plastics DC-170
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mXiveX_Thermoset-Plastics-DC-170.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics DC-170 is an Epoxy; Epoxide (Epoxy) material filled with aluminum. It is available in North America for coating. Primary attribute of Thermoset Plastics DC-170: Impact Resistant. Typical application of Thermoset Plastics DC-170: Coating Applications |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 1.49 | g/cm³ | ASTM D1895 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 88 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 44.8 | MPa | ASTM D638 |
| Flexural Strength (Yield) | 74.5 | MPa | ASTM D790 |
| Compressive Strength | 94.5 | MPa | ASTM D695 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 1.0 Mix Ratio by Weight: 20 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 3.2 | ||
| Demold Time (25°C) | 960 to 1400 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TC9FLZ (Series: FR/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Dryflex® T80 | ELASTO | TPE | Dryflex® |
| Electrafil® PA12 CB | Techmer Engineered Solutions | Nylon 12 | Electrafil® |
| EOS PA 2241 FR | EOS GmbH | Nylon 12 | EOS |
| Hifax CA 60 G NERO | LyondellBasell Industries | PP Copolymer | Hifax |
