Order Products : sales@su-jiao.com

HIDEN® P603H U

Category:	HDPE , High Density Polyethylene
Manufacturer:	YUHWA Korea Petrochemical Ind. Co., Ltd.
Trademark:	HIDEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	mUxAHL_HIDEN-P603H-U.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

HIDEN® P603H U is a High Density Polyethylene material. It is available in Asia Pacific.

Important attributes of HIDEN® P603H U are:

Good UV Resistance

Good Weather Resistance

Wear Resistant

Typical applications include:

Coating Applications

Food Contact Applications

General Information
Features	Good Abrasion Resistance Good UV Resistance Good Weather Resistance
Uses	Coating Applications Pipe Coatings
Agency Ratings	FDA Food Contact, Unspecified Rating
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.944	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.33	g/10 min	ASTM D1238
Water Absorption (Equilibrium)	0.010	%	ASTM D570
Environmental Stress-Cracking Resistance ¹	> 5000	hr	ASTM D1693B

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	58		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	19.6	MPa	ASTM D638
Tensile Elongation (Break)	> 600	%	ASTM D638
Flexural Modulus	686	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	> 490	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	58.0	°C	ASTM D648
Brittleness Temperature	< -70.0	°C	ASTM D746
Vicat Softening Temperature	121	°C	ASTM D1525
Peak Melting Temperature	131	°C	ASTM D3418

Note Message
1 .	100%

Resin Grade	Manufacturer	Category	Trademark
ADDINYL PMD 20170	ADDIPLAST	Nylon 66	ADDINYL
BP Flex D 0850 BLK	Buckeye Polymers, Inc.	TPO	BP Flex
OPNYL OP66GF60	Ovation Polymers Inc.	Nylon 66	OPNYL
POLYfill PPH T5020	Polykemi AB	PP Homopolymer	POLYfill
ESTOPLAST XU 6100BL16	Ester Industries Ltd.	Nylon 66	ESTOPLAST XU