Order Products : sales@su-jiao.com
Sarlink® TPV X9156B
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Sarlink® TPV |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mUl4P4_SarlinkTPVX9156B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SARLINK X9165B is a high performance thermoplastic vulcanizate engineered for use in demanding building and construction applications. SARLINK X9165B is a black, medium hardness, low density grade possessing exceptional chemical resistance, compression set and low temperature performance. It can be easily processed by injection and 2k injection molding with typical applications including gaskets, seals, profiles, and tubing; complies with EN 681-2 for pipe seals. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.957 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| Shaw A | 65 | ASTM D2240 | |
| Shaw A, 5 seconds, extruded | 66 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress - Across Flow 1(Break) | 4.50 | MPa | ISO 37 |
| Tensile Elongation - Across Flow 2(Break) | 550 | % | ISO 37 |
| Compression Set | ISO 815 | ||
| -10°C, 72 hr | 46 | % | ISO 815 |
| 23°C, 72 hr | 24 | % | ISO 815 |
| 70°C, 22 hr | 35 | % | ISO 815 |
| 100°C, 24 hr | 27 | % | ISO 815 |
| Stress relaxation 3 | |||
| 100 days : 23°C | 26 | % | |
| 7 days : 23°C | 21 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (70°C, 168 hr) | 0.10 | % | ISO 188 |
| Change in Tensile Strain at Break in Air (70°C, 168 hr) | -0.70 | % | ISO 188 |
| Change in Shore Hardness in Air (Shao A, 70°C, 168 hr) | -0.20 | ISO 188 | |
| Change in Volume | ISO 1817 | ||
| 70°C, 168 hr, in water | 7.0 | % | ISO 1817 |
| 100°C, 72 hr 4 | 23 | % | ISO 1817 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -58.9 | °C | ASTM D746 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity (200°C, 206 sec^-1) | 280 | Pa·s | ISO 11443 |
| Legal statement |
|---|
| The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Rear Temperature | 175 - 185 | °C | |
| Middle Temperature | 180 - 205 | °C | |
| Front Temperature | 195 - 210 | °C | |
| Nozzle Temperature | 200 - 230 | °C | |
| Processing (Melt) Temp | 200 - 230 | °C | |
| Mold Temperature | 10 - 30 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.500 - 1.00 | MPa | |
| Screw Speed | 100 - 200 | rpm | |
| Cushion | 3.00 - 8.00 | mm |
| Note Message | |
|---|---|
| 1 . | Type 2 |
| 2 . | Type 2 |
| 3 . | ISO 3348 |
| 4 . | IRM 1 oil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TARODUR 100 G3 | Taro Plast S.p.A. | ABS | TARODUR |
| Borealis PP RA130E-8427 | Borealis AG | PP Random Copolymer | Borealis PP |
| Hangzhou Jinxin VMPET Packaging Film | Hangzhou Jinxin Filming Packaging Co., Ltd. | Film, PET | Hangzhou Jinxin |
| EQUATE PE EMDA-6147 | EQUATE Petrochemical Company KSCC | HDPE Copolymer | EQUATE PE |
| Lucon® CP6059F | LG Chem Ltd. | PC | Lucon® |
