Order Products : sales@su-jiao.com
RTP 4085 UP
| Category: | PPA , Polyphthalamide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mPzMla_RTP-4085-UP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
"Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade." |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.33 | g/cm³ | ISO 1183 |
| Moisture Content | 0.050 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 30 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 33000 | MPa | ISO 527-2 |
| Tensile Stress | 345 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 1.8 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 25500 | MPa | ISO 178 |
| Flexural Stress (Injection Molded) | 515 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1(Injection Molded) | 8.0 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 2(Injection Molded) | 80 | kJ/m² | ISO 180/1U |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Data listed is for natural or black colored materials. Pigments can affect properties.Desiccant Type Dryer Required. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 105 | °C | |
| Drying Time - Desiccant Dryer | 4.0 - 6.0 | hr | |
| Dew Point | -30.0 | °C | |
| Processing (Melt) Temp | 300 - 330 | °C | |
| Mold Temperature | 135 - 160 | °C | |
| Injection Pressure | 70.0 - 125 | MPa |
| Note Message | |
|---|---|
| 1 . | 4mm thickness |
| 2 . | 4mm thickness |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflam RF0059 | Eurostar Engineering Plastics | Nylon 66 | Starflam |
| NEO-ZEX™ 2006H | Prime Polymer Co., Ltd. | LLDPE | NEO-ZEX™ |
| HANWHA CHBA-880FR | Hanwha Chemical | Polyolefin, Unspecified | HANWHA |
| KOCETAL® GB304 | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
| MACOMASS PP MM-PP BI 23 | MACOMASS Verkaufs AG | PP Copolymer | MACOMASS PP |
