Order Products : sales@su-jiao.com
Mecoline S RDX 1247 F
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Melos GmbH |
| Trademark: | Mecoline |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mPCQuU_Mecoline-S-RDX-1247-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The compound can be an ideal solution for applications like coax cables, electronic cables, communication cables, low voltage power cables, instrumentation and control cables in harsh environments. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.45 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 12 | g/10 min | ISO 1133 |
| Water Absorption (23°C, 24 hr) | 0.50 | % | IEC 811-1-3 |
| Water Absorption - 240h at 70°C | 5.00 | mg/cm² | IEC 811-1-3 |
| pH | 5.6 | IEC 60754-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Set 1 | IEC 540 | ||
| Elongation under load | 20 | % | |
| Residual elongation | 3.0 | % | |
| Temperature Index | 300 | °C | ASTM D2863 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Conductivity | 0.900 | µS/mm | EN 50267-2-2 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | < 0.100 | % | IEC 754-1 |
| Toxicity | 1.00 | NES 713 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 170 to 180 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 90 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | IEC 811-1-1 | ||
| -- 2 | 16.0 | MPa | |
| -- 3 | > 8.00 | MPa | |
| Tensile Strain | |||
| Break 4 | 180 | % | IEC 811-1-1 |
| Break 5 | > 250 | % | IEC 811-1-1 |
| Break, -40°C | 25 | % | IEC 811-1-4 |
| Break, -30°C | 45 | % | IEC 811-1-4 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 49.0 | kN/m | ASTM D624 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (120°C, 240 hr) | 6.0 | % | IEC 811-1-2 |
| Change in Tensile Strain at Break in Air (120°C, 240 hr) | -12 | % | IEC 811-1-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+11 | ohms·cm | IEC 60167 |
| Dielectric Constant (50 Hz) | 3.90 | IEC 60250 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 38 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 to 160 | °C | |
| Cylinder Zone 2 Temp. | 160 to 170 | °C | |
| Cylinder Zone 3 Temp. | 165 to 175 | °C | |
| Cylinder Zone 4 Temp. | 170 to 180 | °C | |
| Cylinder Zone 5 Temp. | 170 to 180 | °C | |
| Adapter Temperature | 170 to 180 | °C | |
| Die Temperature | 170 to 180 | °C |
| Note Message | |
|---|---|
| 1 . | at 200°C/15min/0.2 MPa |
| 2 . | After crosslinking |
| 3 . | Before crosslinking |
| 4 . | After crosslinking |
| 5 . | Before crosslinking |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD C 4080 | RTP Company | PPA | RTP |
| NEXT REGRIND POMH 500P-100RG | NEXT Specialty Resins, Inc. | Acetal (POM) Homopolymer | NEXT REGRIND |
| Baydur® STR/C-1000 (38% Glass) | Covestro - PUR | PUR-MDI | Baydur® |
| ATPioneers PP CAP101 | Asia Technology Pioneers Ltd | TPO | ATPioneers PP |
| LNP™ LUBRICOMP™ QCL349 compound | SABIC Innovative Plastics | Nylon 610 | LNP™ LUBRICOMP™ |
