Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroelastomer FPO 3632

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroelastomer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	mNB9Gx_3MDyneonFluoroelastomerFPO3632.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Dyneon Fluoroelastomer FPO 3632 is a medium fluorine content peroxide curable grade, which provides excellent physical properties, very good chemical resistance and improved bonding to silicones. The material is recommended for extrusion and moulding processes. Special Features Composition: terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene plus cure site monomer Process target: moulding and extrusion Excellent flow and scorch safety Improved bonding to silicones Excellent physical properties Good low temperature properties High resistance against chemical fluids Typical Applications Dyneon Fluoroelastomer FPO 3632 has been designed for hoses as well as for moulded goods. It can be used for manufacturing of multi-layer turbo charger hoses due to its improved bonding to silicones.

Message

Dyneon Fluoroelastomer FPO 3632 is a medium fluorine content peroxide curable grade, which provides excellent physical properties, very good chemical resistance and improved bonding to silicones. The material is recommended for extrusion and moulding processes.

Special Features

Composition: terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene plus cure site monomer

Process target: moulding and extrusion

Excellent flow and scorch safety

Improved bonding to silicones

Excellent physical properties

Good low temperature properties

High resistance against chemical fluids

Typical Applications
Dyneon Fluoroelastomer FPO 3632 has been designed for hoses as well as for moulded goods. It can be used for manufacturing of multi-layer turbo charger hoses due to its improved bonding to silicones.

General Information
Features	High liquidity Low temperature resistance Good chemical resistance Terpolymer
Uses	Pipe
Appearance	White-like
Forms	Thick sheet
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.81	g/cm³	Internal method
Mooney Viscosity (ML 1+10, 121°C)	37	MU	Internal method
Fluorine Content	67	%	Internal method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	73		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	6.60	MPa	DIN 53504
Tensile Strength	19.4	MPa	DIN 53504
Tensile Elongation (Break)	180	%	DIN 53504
Compression Set
150°C, 22 hr ¹	48	%	ASTM D395
200°C, 70 hr ²	26	%	ASTM D395B

Thermal	Nominal Value	Unit
Glass Transition Temperature	-19.0	°C

Note Message
1 .	on 2 mm disks; 50% deformation VDA 675218
2 .	on buttons

Resin Grade	Manufacturer	Category	Trademark
Moplen EP220R	LyondellBasell Industries	PP Impact Copolymer	Moplen
Titacon® GF930	Titan Plastics Compounds Co., Ltd.	Acetal (POM) Copolymer	Titacon®
ELASTOSIL® R 500/60	Wacker Chemie AG	Silicone	ELASTOSIL® R
Grivory® GVL-5H black 9915	EMS-GRIVORY	Nylon 66+Nylon 6I/X	Grivory®
POCAN® S 1506 901510	LANXESS Corporation	PBT	POCAN®