Order Products : sales@su-jiao.com
Epolene® C-17
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Epolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mL5UYF_Epolene-C-17.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Epolene C-17 is a branched low density polyethylene with a relatively high melt point and viscosity compared to other Epolene C-type Polymers. It is useful to modify paraffin wax to improve the blend viscosity, grease resistance, blocking temperature, scuff resistance, and gloss. Epolene C-17 commonly replaces granular LLDPE as the base polymer in color concentrates because it's easier to process and has higher output rates. Epolene C-17 has good high temperature stability, low color, low temperature flexibility, and excellent compatibility with various tackifying resins. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 19 | g/10 min | |
| Molecular Weight 1 | 100000 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ring and Ball Softening Point | 133 | °C | ASTM E28 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (125°C) | Solid at this temp |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Penetration Hardness 2(25°C) | 200 | mm | ASTM D5 |
| Note Message | |
|---|---|
| 1 . | Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards |
| 2 . | Needle under 100-g load for 5s, tenths of mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRE-ELEC® PP 1380 | Premix Oy | TPO | PRE-ELEC® |
| Vitaster® UY74BK6198 | Jackdaw Polymers | PBT | Vitaster® |
| Hyundai EP PA6 LS260 | HYUNDAI EP Co., Ltd. | Nylon 6 | Hyundai EP PA6 |
| KEBAFLEX® S 25 A.01 | BARLOG plastics GmbH | TES | KEBAFLEX® |
| Karina LILAC PVC COMPOUND 830-34/148-IS-RG-PO (*) | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
